Push to talk
86
■ Make and receive a PTT call
Set the phone to use the loudspeaker or ear piece for PTT
communication. When the ear piece is selected, you can use the phone
normally, by holding it to your ear.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
When connected to the PTT service, you can make or receive channel
calls, group calls, or one-to-one calls. One-to-one calls are calls you
make to only one person.
Press and hold the PTT key the entire time you are talking, and hold the
phone in front of you so that you can see the display. When you are
finished, release the PTT key. Talking is allowed on a first-come,
first-served basis. When someone stops talking, the first person to press
the PTT key can talk next.
To check the login status of your contacts, select Menu > Push to talk >
Contacts list. This service depends on your network operator or service
provider and is only available for subscribed contacts. , , or
indicate that the contact is available, not logged into the PTT service, or
unknown. indicates that the contact does not want to be disturbed.
You cannot call the contact, but you can send a callback request.
To subscribe a contact, select Options > Subscribe contact, or if one or
more contacts are marked, select Subscribe marked.
Make a channel or a group call
To make a call to the default channel, press the PTT key. A tone sounds,
indicating that the access is granted, and the phone displays your
nickname and channel name. See “PTT channels,” p. 89.
To make a call to a nondefault channel, select Channel list in the PTT
menu, scroll to the desired channel, and press the PTT key.
To make a group call from Contacts, the recipients must be connected to
the PTT service. Select Menu > Contacts > Groups, scroll to the desired
group, and press the PTT key.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
