Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
13.Apr.2007
21
Service Manual 6290 RM-176 Copyright © 2007 NOKIA Corporation. All rights reserved.
Approved 2.0
MGR
Page
(45)
1. Needed tools: A Torx and a torque driver, a Torx Plus size 6
bit, metal tweezers, the SS-93, the SRT-6 and the DC-plug.
2. Open and remove the BATTERY COVER. Remove the Battery if
inserted.
3. Open the unit.
4. Place the SRT-6 between the KEYMAT and the A-COVER LOWER
and carefully slide it along the edge as shown.
5. Remove the KEYMAT avoiding to touch the LEDs.
6. Close the unit.
LOWER BLOCK DISASSEMBLY11.
To Next Page
Loading...
