Get started
12
Copyright © 2007 Nokia. All rights reserved.
1 Connect the lead from the CA-101 to the micro USB 
socket on the top of your phone.
2 Connect the CA-101 to your PC or laptop. Select USB 
mode: appears on the display screen of your phone.
3  Select the mode you want.
The AC-6 charges the battery much faster than the 
CA-101. Charging with the AC-6 is recommended when 
short charging times are needed.
Switch the phone on and off 
Warning: Do not switch the phone on when 
wireless phone use is prohibited or when it may 
cause interference or danger.
Press and hold the power key as shown.
If the phone asks for a PIN or a UPIN code, 
enter the code (it may be displayed as **** 
after entering), and select OK.
When you switch on your phone for the 
first time, and the phone is in the standby 
mode, you are asked to get the 
configuration settings from your service 
provider (network service). Confirm or 
decline the query. See Connect to 
support, p. 34, and “Configuration 
settings service”, p. 12.
Set the time, zone, and date
When you switch on your phone for the first time, and the 
phone is in the standby mode, you may be asked to set the 
time and date. Fill in the fields, and select Save.
To access Date and time later, select Menu > Settings > 
Date and time > Date & time settings, Date and time 
format, or Auto-update of time (network service) to 
change the time, time zone, and date settings.
Configuration settings service
To use some of the network services, such as mobile 
internet services, MMS, Nokia Xpress audio messaging, or 
remote internet server synchronisation, your phone needs 
the correct configuration settings. For more information 
on availability, contact your network operator, service 
provider, nearest authorised Nokia dealer, or visit the 
support area on the Nokia website, www.nokia.com.hk/
support.
When you have received the settings as a configuration 
message, and the settings are not automatically saved and 
activated, Configuration settings received is displayed. 
Select Show > Save. If required, enter the password 
supplied by the service provider.