Configure an E-240W-A indoor ONT
128
7368 ISAM ONT E-240W-A Product Guide
3FE-46974-AAAA-TCZZA Issue: 01
Procedure 46 Restore factory defaults
1 Select Maintenance > Factory Default from the top-level menu in the EPON Home Gateway
window, as shown in Figure 62.
Figure 62 Factory default window
2 Click Factory Default to reset the ONT to its factory default settings.
3 STOP. This procedure is complete.
Release 06.00.00h | January 2019 | Edition 08
To Next Page
Loading...
