Nokia 7368 ISAM ONT E-240W-A - Replacement Procedure

7368 ISAM ONT E-240W-A Product Guide Replace an E-240W-A indoor ONT
Issue: 01 3FE-46974-AAAA-TCZZA 59
6.6 Procedure
Use this procedure to replace an E-240W-A indoor ONT.
1 Deactivate the ONT services at the P-OLT.
i Use the RTRV-ONT command to verify the ONT status and the associated services.
Record the serial number of the ONT displayed in the command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
ii If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
2 If used, disable the Wi-Fi service by pressing the WLAN button; see Figure 17 for the location
of the WLAN button.
Figure 17 E-240W-A indoor ONT connections
3 Power down the unit by using the on/off power switch.
4 Disconnect the POTS, Ethernet, and power cables from the ONT; see Figure 17 for the
connector locations on the E-240W-A indoor ONT.
ON/OFFPOWER
USB2USB1LAN4LAN3LAN2LAN1
TEL1 TEL2
WLAN
RESET
WPS2.4G
WPS5G
Wall
mounting
hole
Wall
mounting
hole
POTS
ports (2)
(RJ-11)
Ethernet
ports (4)
(RJ-45)
USB
ports (2)
Wi-Fi
security
buttons
2.4G and 5G
Reset
button
Power
input
Fiber optic
port
Wireless
on/off
button
On/off
button
25272
Release 06.00.00h | January 2019 | Edition 08