Nokia A032 User Manual

Using TFTP
111
Modifying the config.txt file
Note that some entries are commented out
(lines starting with ‘
/*’). This denotes entries
that are set to a default value. You can delete
these lines without affecting the result when
the file is downloaded to the Nokia A032.
If you want to modify a parameter, delete the
comment characters and amend the parameter
accordingly.
For example, to change the radio channel:
1 Use a text editor to open
config.txt.
2 Modify the file as follows:
Old line:
/*%channel: 10
Modified line: %channel: 11
3 Save config.txt.
4 Send the file to the Nokia A032 using the
TFTP client.
When you send
config.txt, the following
action is taken by the Nokia A032:
1 The new configuration file is read in and
checked for format. If there are any format
errors the configuration is not updated
2 If the send is good, all the parameters
(except password) are reset to their default
value.
3 New settings from the config.txt file are
loaded into the Nokia A032.
4 The Nokia A032 performs a restart with the
new settings.
A032-Adv.book Page 111 Monday, November 13, 2000 10:47 AM

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English