118
Nokia A032 Advanced User Guide
MIB Summary – RFC1213 – MIB II
(1.3.6.1.2…)
The Version of RFC1213 supplied has been
modified to recognize the IEEE802.11 interface
type The following is a summary of the sections
of MIBII indicating which parts of the MIB are
supported:
System All fields supported (Read only).
The Contact, Name and Location values can be set using
the Web manager function (see page 63).
Interfaces All fields supported. There are two entries in the Inter-
face table. Interface 1 is the Ethernet Interface and
Interface 2 is the IEEE802.11 Interface.
AT Not Supported.
Internet Protocol All fields supported (Static information).
ICMP Supported as appropriate.
TCP TCP connections are shown in an eight-row table. All
fields are supported in each table row. However, the table
size is fixed. If there are more than 8 TCP active connec-
tions to the Access Point, only the first eight will be
shown.
UDP Supported for UDP listeners TFTP and SNMP.
EGP Not supported.
Transmission DOT3 Stats Table supported (partial).
SNMP All fields supported.
A032-Adv.book Page 118 Monday, November 13, 2000 10:47 AM
To Next Page
Loading...
Need help?
General
