68
Nokia A032 Advanced User Guide
Using the serial port
To use the serial port connection, attach a
terminal (usually a PC workstation) with the
settings
9600,8,N (9600 Baud, 8 bits, no
parity) via a suitable cable to the serial port
connector on the Nokia A032.
If you are using another PC with a terminal
emulation program you’ll need to use a null
modem. The Nokia A032 requires a DB9 female
connector. Cables designed for PC-PC data
transfer using the serial port generally have the
null modem function built in and are suitable.
Once connected physically, you can use a
terminal emulator such as Hyperterminal.
Using a Telnet session
You can use any LAN station to access the CLM
on the Nokia A032. To use Telnet on a
Windows 95/98 machine:
1 On the workstation, choose
Run from the
Start menu.
2 Type
Telnet.
If this fails for any reason, use the Find Files
utility to search for
Telnet. This should
find a program called
Telnet.exe, on
which you should double-click. It’s a good
idea to create a shortcut to the Telnet
program for future use.
3 In the Telnet window, choose
Remote system
from the Connect menu.
4 Enter the IP address of the Nokia A032 and
press Enter.
At this point, the Nokia banner should
appear, followed by a logon prompt.
Important!! You need
a null-modem cable
for this operation.
In order to use Telnet,
the Nokia A032 needs
to have an IP address
configured.
A032-Adv.book Page 68 Monday, November 13, 2000 10:47 AM
To Next Page
Loading...
Need help?
General
