Command line interface
79
Management functions
Parameter Description Default
password Sets the password access to the CLM and the web
interface. The password is an alphanumeric string
up to 16 characters long.
default
telnet on enables built-in Telnet management
function
off disables Telnet management function
port sets the number for the Telnet server
port (e.g. set telnet 23).
Setting off will not affect a terminal attached via
the serial port (which is always enabled when a
terminal is attached).
23
web on enables built-in Web management
function
off disables Web management function
port sets the number for the web server port
(e.g.
set web 80).
To access the web server on a different port (for
example 6000) enter the URL on your browser as
http://xxx.xxx.xxx.xxx:6000
using the IP address appropriate for your access
point.
80
admission Determines which wireless stations can
communicate with the access point. Possible values
are:
all any station can communicate with the
access point
named only those stations that have a NID name
entry are accepted (see NID naming and
security on page 97); all others are
blocked
none all stations are blocked; use this to
temporarily disable the access point
while allowing access from the LAN for
management reasons
all
A032-Adv.book Page 79 Monday, November 13, 2000 10:47 AM