SNMP manager
121
A032 system configuration
The entries in this group relate to the current
configuration of the A032:
AP Name User assigned name of Access Point.
Default is LocalAP.
Net Name Network Name in ASCII text format.
Admissions Mode Indicates access security in effect (all, named, none).
Protocols Protocol filter (all, or TCP/IP).
Telnet Access indicates whether Telnet access is enabled.
Telnet Port TCP/IP port number on which Telnet service is provided.
Web Access indicates whether Web access is enabled.
Web Port TCP/IP port number on which Web service is provided.
Management Enable Global setting of Management enable flag (all, none,
specific).
Gateway Address IP address of network gateway configured into Access
Point.
Current Time Time and date in Access Point.
A032-Adv.book Page 121 Monday, November 13, 2000 10:47 AM
To Next Page
Loading...
