Nokia A032 User Manual

180
Nokia A032 Advanced User Guide
001010: Bad CMOS memory
Indicates that the configuration memory had a
checksum error. This memory is used to store
the optional settings for the unit. If a checksum
error is encountered the Nokia A032 will
automatically re-load the default configuration
parameters.
101000: LAN controller error
Indicates failure of the Ethernet interface. Unit
must be repaired by dealer.
011000: Bad configuration
Indicates that the configuration information is
bad.
011001: Bad manufacturer's information
Indicates that the internal configuration
information has been corrupted. Contact Nokia
Technical Support.
011010: Bad log sector
Indicates that the log information in the flash
memory has been corrupted. In this case the
Nokia A032 will automatically restore an
empty log file. The original log and NID name
information will be lost but the unit will
proceed with initialization.
011011: System error
Indicates failure of initialization due to an
unknown cause. If this persists the unit must be
returned to the dealer for repair.
A032-Adv.book Page 180 Monday, November 13, 2000 10:47 AM

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English