34
Nokia A032 Advanced User Guide
Making changes
In general, to alter configuration parameters:
1 Click a link in the lefthand frame to display
the appropriate configuration page.
2 Make any changes, as necessary.
3 On many screens you need to click
Enter (or
in some cases
Add) in order for the changes
to be recorded.
4 If necessary, repeat steps 1, 2 and 3 until
you’ve completed configuration.
5 Click
Save in the lefthand frame. This will
cause the new parameters to be written to
permanent memory; the Nokia A032 will
restart, putting the changes into effect.
Reverting to active or default settings
Many configuration screens have the following
radio buttons at the bottom:
•
Reset to active settings – This causes the
original settings (as at the last restart) to be
restored.
•
Reset to default settings – This causes the
factory default settings to be loaded (only
those shown on this screen – not all
parameters).
To reset:
1 Select the appropriate radio button.
2 Click
Reset.
3 Click
Save.
Important: Don’t miss
out this step.
A032-Adv.book Page 34 Monday, November 13, 2000 10:47 AM
To Next Page
Loading...
Need help?
General
