Using the Web manager
47
However, the TFTP function is not password
protected. If you are concerned about security
you may choose to disable the TFTP function
(except when required) or specify the IP
addresses of up to four managers’ workstations
which are allowed to perform the task. In this
case the A032 will only accept transfers from
workstations with those specified IP addresses.
In addition, only the named managers will be
allowed to access the Telnet or web functions.
To set specific managers:
1 Set
Specific in the Web/Telnet/FTP Manager
field on the Advanced Access Point setup
screen.
2 Click
Enter.
3 Click the new button (
Set Specific Managers)
that appears next to the Web/Telnet/FTP
Manager field.
You’ll see the following screen:
A032-Adv.book Page 47 Monday, November 13, 2000 10:47 AM
To Next Page
Loading...
Need help?
General
