Nokia A032 User Manual

60
Nokia A032 Advanced User Guide
Advanced Internet Access setup (LAN or
Wireless)
In most cases the NAT firewall will be used in
conjunction with the serial port and modem for
Internet access. In certain applications it may
be convenient to connect the Ethernet LAN port
or the wireless interface to the external side of
the NAT firewall. A description of such
applications is beyond the scope of this section,
but there is a brief description in LAN and radio
port options on page 199.
If you set the NAT function to
LAN or AIR in the
Advanced Access Point setup screen (see
page 40), the Internet Access Setup screen (both
basic and advanced) will show a different set of
parameters:
For correct operation of the unit when
connected to an external LAN or wireless LAN,
all four of the parameters must be correctly
specified.
Internet Gateway
If you intend to use
the Nokia A032 only
with a dial-up modem
you can skip this
section.
A032-Adv.book Page 60 Monday, November 13, 2000 10:47 AM

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English