Command line interface
75
Radio-related
Parameter Description Default
channel Specifies the operating channel for the Nokia A032.
10
domain Sets the operating area and enables valid channels. depends on
where unit
was
purchased
rts_threshold Determines whether RTS/CTS frames should be sent
on the wireless link and what size frames they
should be used for. Frames larger than the
parameter value will be preceded by an RTS/CTS
exchange.
2301
short_retry Specifies the number of retries the radio will use
during an RTS/CTS attempt before aborting.
15
long_retry Specifies the number of retries the radio will use
during a data transmission attempt before aborting.
15
sifs_time SIFS is an IEEE802.11 parameter which affects
turnaround time. The value is specified in IEEE802.1
and the normal setting for this parameter is 0. A
value of 0 is treated as default and causes the
system to use the IEEE802.11 compatible value. In
some special applications where IEEE802.11 is not
required an alternate value may be specified. It is
highly recommended that the default value be
used unless you have expert advice.
0
frag_threshold frag_threshold is an IEEE802.11 parameter which
determines the maximum size of frames sent by the
radio. Frames larger than frag_threshold are sent in
several pieces.
Lowering the value of frag_threshold can improve
throughput for poor radio conditions, but reduces
throughput for good radio conditions.
2346
A032-Adv.book Page 75 Monday, November 13, 2000 10:47 AM
To Next Page
Loading...
Need help?
General
