To delete several contacts at the same time, select Options > Mark/Unmark to
mark the desired contacts, and to delete, select Options > Delete.
To listen to the voice tag assigned to a contact, select the contact and Options >
Voice tag details > Options > Play voice tag.
When entering contacts or editing voice commands, do not use very short or similar
names for different contacts or commands.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
Assign default numbers and addresses
If a contact has several numbers or addresses, a default number or address makes
it easier for you to call or send a message to the contact. The default number is
also used in voice dialling.
1. Select Menu > Contacts.
2. Select a contact and Options > Defaults.
3. Select a default to which you want to add a number or an address, and select
Assign.
4. Select a number or an address you want to set as a default.
5. To exit the Defaults view and save the changes, tap outside the view.
Ringing tones, images, and call text for
contacts
You can define a ringing tone for a contact or contact group, and an image and call
text for a contact. When the contact calls you, the device plays the selected ringing
tone and shows the call text or image (if the caller’s phone number is sent with
the call and your device recognises it).
Select Menu > Contacts.
Add more fields to a contact details view — Select the contact and Options >
Edit > Options > Add detail.
Define a ringing tone for a contact or contact group — Select the contact or
contact group and Options > Ringing tone, and select a ringing tone.
Contacts
© 2010 Nokia. All rights reserved.38
To Next Page
Loading...
Need help?
General
