A roaming agreement is an agreement between two or more service providers
to enable the users of one service provider to use the services of other service
providers.
● Operator selection — Select Automatic to set the device to search for and
select one of the available networks, or Manual to manually select the network
from a list. If the connection to the manually selected network is lost, the device
sounds an error tone and asks you to reselect a network. The selected network
must have a roaming agreement with your home network.
● Cell info display — Set the device to indicate when it is used in a cellular
network based on microcellular network (MCN) technology and to activate cell
info reception.
Access points
Create a new access point
Select Menu > Settings and Connectivity > Destinations.
You may receive access point settings in a message from a service provider. Some
or all access points may be preset for your device by your service provider, and you
may not be able to change, create, edit, or remove them.
1. Select
Access point.
2. The device asks to check for available connections. After the search, connections
that are already available are shown and can be shared by a new access point.
If you skip this step, you are asked to select a connection method and to define
the settings needed.
To view access points stored in your device, select an access point group. The
different access point groups are the following:
Internet access points
Multimedia messaging access points
WAP access points
Uncategorised access points
The different access point types are indicated with the following:
Protected access point
Packet data access point
Connectivity
© 2010 Nokia. All rights reserved.80
To Next Page
Loading...
Need help?
General
