Manage access point groups
To avoid selecting a single access point every time the device makes a network
connection, you can create a group that contains various access points to connect
to that network and define the order in which the access points are used.
Select Menu > Settings and Connectivity > Destinations.
Create a new access point group — Select Options > Manage > New
destination.
Add access points to an access point group — Select the group and Options >
New access point.
Copy an existing access point from another group — Select the group, go to
the access point to copy, and select Options > Organize > Copy to other
dest..
Change the priority of an access point within a group — Select Options >
Organize > Change priority.
Packet data access point settings
Select Menu > Settings and Connectivity > Destinations > Access point, and
follow the instructions.
Edit a packet data access point — Select an access point group and access point
marked with
. Follow the instructions from your service provider.
Select from the following:
● Access point name — The access point name is provided by your service
provider.
● User name — The user name may be needed to make a data connection, and
is usually provided by your service provider.
● Prompt password — If you must enter the password every time you log in to
a server, or if you do not want to save your password in the device, select Yes.
● Password — A password may be needed to make a data connection, and is
usually provided by your service provider.
● Authentication — To always send your password encrypted, select Secure. To
send your password encrypted when possible, select Normal.
● Homepage — Depending on the access point you are setting up, enter the web
address or the address of the multimedia message centre.
● Use access point — Set the device to connect to the destination using this
access point after confirmation or automatically.
Connectivity
© 2010 Nokia. All rights reserved. 81
To Next Page
Loading...
