User Guide Installing the FastMile 5G Receiver
3TG-02285-AAAA-TCZZA-02 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
17
Figure 10 Apple App Store
Using your smart phone, use the in-app QR code scanner to read the QR code for
the FastMile 5G Receiver. The QR code can be found on:
• the outside of the shipping box of the FastMile 5G Receiver
• the sticker fixed to the PoE cable that is pre-attached to the FastMile 5G
Receiver
• the quick onboarding guide:
Figure 11 Example of QR code on the quick onboarding guide
Wait until the smart phone connects to the mobile network
Connect the FastMile 5G Receiver to power at a potential installation location for
FastMile 5G Receiver as described in Connecting the FastMile 5G Receiver to
power.
Enable Bluetooth on your smart phone. The smart phone and downloaded app pair
with the FastMile 5G Receiver. If you are requested by the Nokia Wireless Mobile
App to enter the Bluetooth PIN number, enter the Bluetooth PIN code that is provided
on the quick onboarding guide. The multicolor LEDs on the front and back of the
FastMile 5G Receiver blink blue during pairing. The LEDs turn solid blue when the
pairing process completes.
To Next Page
Loading...
