WebUI screens
48
User Guide
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3TG-02285-AAAA-TCZZA-02
Static routes
To add static routes, select Network from the WebUI's left-side menu, and select
Static Routes.
Figure 33 Network/Static Routes screen example
You can configure the following static route parameters:
• Destination IP v4 address in dotted format
• Destination netmask in dotted format
• Gateway IP v4 address in dotted format
• Interface, by selecting from the pull-down
Click Add.
To remove an existing static route, find it in the filtered list and click Delete.
To Next Page
Loading...
