User Guide Installing the FastMile 5G Receiver
3TG-02285-AAAA-TCZZA-02 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
19
Both of the above installation types are described in the procedure in this section.
Figure 12 Connecting the FastMile 5G Receiver to power
Connect the FastMile 5G Receiver to power by:
• If applicable, such as for mounting on the outside of a window, connecting the
supplied PoE cable to the free end of the pre-attached PoE cable of the FastMile
5G Receiver
• Connecting the following to the POE/WAN port on the supplied PoE injector as
applicable:
- the other end of the supplied PoE cable
- the free end of the pre-attached PoE cable of the FastMile 5G Receiver
• Connecting the PoE injector AC cable to the PoE injector
Note: Do not plug the PoE injector AC cable into an electrical outlet before you have first
connected the PoE injector AC cable to the PoE injector, as described in the two following
items.
To Next Page
Loading...
