Tools
99
Copyright © 2006 Nokia. All rights reserved.
Network
Operator selection—Select Automatic to set the device to
search for and select one of the available networks,
or Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is,
the operator whose SIM card is in your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Enhanc. sett.
Indicators shown in the standby mode:
—A headset is connected.
—The headset is unavailable, or a Bluetooth connection
to a headset is lost.
Select Headset or Bluetooth handsfree and the following
options are available:
Default profile—To set the profile that you want activated
each time you connect a certain enhancement to your
device. See “Profiles—Set tones”, p. 22.
Automatic answer—To set the device to answer an
incoming call automatically after 5 seconds. If the Ringing
type is set to Beep once or Silent, automatic answer is
disabled.
Voice commands
You can use voice commands to control your device.
For more information about the enhanced voice
commands supported by your device, see “Voice dialling”,
p. 26.
To activate enhanced voice commands for starting
applications or profiles, you must open the Voice comms.
application and its Profiles folder. Press , and select
Tools > Voice cm. > Profiles. The device creates voice
commands for the applications and profiles. You can now
use enhanced voice commands by pressing and holding the
right selection key ( ) and saying a voice command in
the standby mode. The voice command is the name of the
application or profile displayed in the list.
To Next Page
Loading...
