Nokia N91 - Call Waiting (Network Service); Options During a Voice Call

Make calls
28
Copyright © 2006 Nokia. All rights reserved.
Call waiting (network service)
You can answer a call while you have another call in
progress if you have activated Call waiting in Settings >
Call > Call waiting.
Tip! To change the device tones for different
environments and events, for example, when you
want your device to be silent, see “Profiles—Set
tones”, p. 22.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. Select
Options > Transfer to connect an incoming call or a call
on hold with an active call and to disconnect yourself from
the calls. To end the active call, press or close the
slide cover. To end both calls, select Options > End all
calls.
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select Options during a call for some
of the following options: Mute or Unmute, Answer,
Reject, Swap, Hold or Unhold, Activate handset, Activate
loudsp., or Activate handsfree (if a compatible headset
with Bluetooth connectivity is attached), End active call
or End all calls, New call, Conference, and Transfer.
Select from the following:
Replace—To end an active call and replace it by answering
the waiting call.
Send DTMF—To send DTMF tone strings, for example,
a password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause
character (p), press repeatedly. Select OK to send the
tone.
Tip! You can add DTMF tones to the Phone number
or DTMF fields in a contact card.