Nokia N91 - Monitor All Communication Events

My own
71
Copyright © 2006 Nokia. All rights reserved.
Monitor all communication events
Icons in Log:
Incoming
Outgoing
Missed communication events
To monitor all voice calls, text messages, or data
connections registered by the device, press , select My
Own > Log, and press the joystick to the right to open the
general log. For each communication event, you can see
the sender or recipient name, phone number, name of the
service provider, or access point. You can filter the general
log to view just one type of event and create new contact
cards based on the log information.
Tip! If you want to see the duration of a voice call on
the main display during an active call, select
Options > Settings > Show call duration > Yes.
Tip! To view a list of sent messages, press , and
select Messaging > Sent.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging centre, or Web pages are shown as
packet data connections.
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options >
Clear log. Select Yes to confirm.
To set the Log duration, select Options > Settings > Log
duration. The log events remain in the phone memory for
a set number of days after which they are automatically
erased to free memory. If you select No log, all the log
contents, recent calls register, and messaging delivery
reports are permanently deleted.
To view the details of a communication event, in the
general log view scroll to an event, and press the joystick.
Tip! In the details view you can copy a phone
number to the clipboard, and paste it to a text
message, for example. Select Options > Copy
Number.
Packet data counter and connection timer: To view how
much data, measured in kilobytes, is transferred and how
long a certain packet data connection lasts, scroll to an
incoming or outgoing event indicated by Pack., and select
Options > View details.