Nokia N91 - Synchronise Data

Connectivity
87
Copyright © 2006 Nokia. All rights reserved.
Applications—Select the applications to synchronize
with this profile, Contacts and Calendar, for example.
Scroll to each application and press the joystick to
define its synchronization settings:
• Include in sync—Select Yes if you want to
synchronise the application.
• In Remote database, enter a correct path to the
remote calendar, address book, or database on the
server.
• Select Synchronisat. type: Normal (two-way
synchronisation), To server only, or To phone only.
• Connection settings—Define the following.
Contact your service provider or system
administrator for the correct values.
• Server version—Select the SyncML version the
synchronization server uses. You must select 1.2 to
synchronize e-mail.
• Server ID—Enter the server ID for the e-mail server
(shown only if Server version is set to 1.2).
• Data bearer—Select the connection type: Internet,
or Bluetooth.
• Access point (shown only if Data bearer is set to
Internet)—Select an access point to use for the data
connection.
• Host address—The IP address of the host server.
• Port—The server port number (shown only if Data
bearer is set to Internet).
• User name—Your user ID for the synchronisation
server.
• Password—Your password for the synchronization
server.
• Allow sync requests—Select Yes if you want to
allow the server to start a synchronization.
• Accept all sync reqs.—Select No if you want your
device to ask you before a synchronization initialised
by the server is started.
• Network authentic. (shown only if Data bearer is
set to Internet)—Select Yes to enter a network user
name and password. Scroll down to view the user
name and password fields.
3 Select Back to save the settings and return to the main
view.
Synchronise data
In the Sync main view, you can see the different
synchronization profiles and the kind of data to be
synchronized.
1 Select a synchronization profile and Options >
Synchronise. The status of the synchronization is
shown at the bottom of the screen.
To cancel synchronization before it finishes, select
Cancel.
2 You are notified when the synchronization is complete.
After synchronization is complete, select Options >