EasyManuals Logo

Nokia N93 User Guide

Nokia N93
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #104 background imageLoading...
Page #104 background image
Copyright
©
2006 Nokia. All rights reserved.
Tools
103
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Autolock period — You can set an autolock period, a
time-out after which the device automatically locks. To
turn off the autolock period, select None.
To unlock the device, enter the lock code.
When the device is locked, calls still may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press . A list of
commands opens. Select Lock phone.
Lock if SIM changed — You can set the device to ask for
the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that
are recognized as the owner’s cards.
Closed user group — You can specify a group of people to
whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
Confirm SIM services — You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
Glossary of PIN and lock codes
If you forget any of these codes, contact your service
provider.
Personal identification number (PIN) code — This code
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the
code is blocked, and you need the PUK code to unblock it.
UPIN code — This code may be supplied with the USIM
card. The USIM card is an enhanced version of the SIM
card and is supported by UMTS mobile phones.
PIN2 code — This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in
your device.
Lock code (also known as security code) — This code (5
digits) can be used to lock the device to avoid
unauthorized use. The factory setting for the lock code is
12345. To avoid unauthorized use of your device, change
the lock code. Keep the new code secret and in a safe place
separate from your device. If you forget the code, contact
your service provider.
Personal unblocking key (PUK) code and PUK2 code —
These codes (8 digits) are required to change a blocked PIN
code or PIN2 code, respectively. If the codes are not
supplied with the SIM card, contact the operator whose
SIM card is in your device.
9247229_N93-1_en_Apac.book Page 103 Thursday, May 18, 2006 3:43 PM

Table of Contents

Other manuals for Nokia N93

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nokia N93 and is the answer not in the manual?

Nokia N93 Specifications

General IconGeneral
Zoom capability3x
Front camera typeSingle camera
Rear camera resolution2048 x 1536 pixels
Video capture resolution (max)640 x 480 pixels
2G standardsEDGE, GPRS
Ringer typePolyphonic
Panel typeTFT
Display diagonal2.4 \
Display resolution240 x 320 pixels
Display number of colors262144 colors
Internal memory50 MB
Compatible memory cardsminiSD
Multimedia Messaging Service (MMS)Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Bundled softwareAdobe Premiere Elements 2.0
Talk time (2G)5.1 h
Battery capacity1100 mAh
Standby time (2G)240 h
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Depth28.2 mm
Width55.5 mm
Height118.2 mm
Weight180 g

Related product manuals