Nokia N93 - Device Manager

Copyright
©
2006 Nokia. All rights reserved.
Connectivity
84
2 You are notified when the synchronization is
complete. Select Yes to view the log file showing the
synchronization status and how many entries have
been added, updated, deleted, or discarded (not
synchronized) in your device or on the server.
Device manager
Press , and select Connect. > Dev. mgr.. You may
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select Options >
Start configuration.
To allow or deny receiving of configuration settings from
service providers, select Options > Enable config. or
Disable config..
Server profile settings
Contact your service provider for the correct settings.
Server name — Enter a name for the configuration server.
Server ID — Enter the unique ID to identify the
configuration server.
Server password — Enter a password to identify your
device to the server.
Access point — Select an access point to be used when
connecting to the server.
Host address — Enter the URL address of the server.
Port — Enter the port number of the server.
User name and Password — Enter your user name and
password.
Allow configuration — To receive configuration settings
from the server, select Yes.
Auto-accept all reqs. — If you want your device to ask for
confirmation before accepting a configuration from the
server, select No.
9247229_N93-1_en_Apac.book Page 84 Thursday, May 18, 2006 3:43 PM