Copyright
©
2006 Nokia. All rights reserved.
Connectivity
79
Settings
Press , and select Connect. > Bluetooth. When you
open the application for the first time, you are asked to
define a name for your device. After you set Bluetooth
connectivity on and change My phone's visibility to
Shown to all, your device and this name can be seen by
other users with devices using Bluetooth technology.
Select from the following:
Bluetooth — Select On or Off. To connect wirelessly to
another compatible device, first set Bluetooth connectivity
On, then establish a connection.
My phone's visibility — To allow your device to be found
by other devices with Bluetooth technology, select Shown
to all. To hide it from other devices, select Hidden.
My phone's name — Edit the name of your device.
Remote SIM mode — To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On.
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. Before
the mode can be activated, the two devices must be paired
and the pairing initiated from the other device. When
pairing, use a 16-digit passcode, and set the other device
as authorized. See "Pair devices", on page 80. Activate the
remote SIM mode from the other device.
When the remote SIM mode is on in your Nokia N93,
Remote SIM is displayed in the standby mode. The
connection to the wireless network is turned off, as
indicated by in the signal strength indicator area, and
you cannot use SIM card services or features requiring
cellular network coverage. However, a wireless LAN
connection remains active during the remote SIM mode.
Warning: In the remote SIM mode, you cannot
make or receive any calls with your device, except
make calls to certain emergency numbers, or use
other features that require network coverage. To
make calls, you must first exit the remote SIM
mode. If the device has been locked, enter the lock
code.
To exit the remote SIM mode, press the power key, and
select Exit rem. SIM mode.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden.
Do not pair with an unknown device.
9247229_N93-1_en_Apac.book Page 79 Thursday, May 18, 2006 3:43 PM