NSM–3/3D
Service Software Instructions
PAMS Technical Documentation
Page 72
Issue 4 02/2002
Nokia Mobile Phones Ltd.
Flash Phone... command
Activation Status Bar Text
Alt, D,F Open Flash Phone dialog box.
This command is used for flashing new software into the phone. When
flashing dead phone, the user may be asked to select phone type. If more
than one phone is flashed without closing the dialog, then the user must
press Check button after the phone has been replaced.
Selection opens the following Flash Phone dialog box. When flashing is
started, waiting window is displayed, telling the user the estimated flash-
ing time.
Flashing files are delivered in product and market area specific flash
packages. These packages should be unpacked to product specific sub-
directory of WinTesla directory e.g.
C:\WINTESLA\NSM–X
for NSM–X
flash. This directory will then contain product specific INI–file e.g. NSM–
X.INI in which the different market areas and files are described.
NOTE: This is a screen sample for NSM–3, actual information may differ.
Dialog mode: modal
To Next Page
Loading...
Need help?
General
