Nokia RM-180 Service Manual

3. Read the disclaimer text carefully and click Yes.
Figure 5 Disclaimer text
4. Choose the destination folder.
The default folder C:\ProgramFiles\Nokia\Phoenix is recommended.
5. To continue, click Next.
To choose another location, click Browse (not recommended).
6. Wait for the components to be copied.
The progress of the installation is shown in the Setup Status window.
7. Wait for the drivers to be installed and updated.
The process may take several minutes to complete.
If the operating system does not require rebooting, the PC components are registered right away.
If the operating system requires restarting your computer, the Install Shield Wizard will notifies about it.
Select Yes... to reboot the PC immediately or No... to reboot the PC manually afterwards.
After the reboot, all components are registered.
Note:
Phoenix does not work, if the components have not been registered.
RM-180
Service Software Instructions Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 3 –7
Copyright © 2006 Nokia. All rights reserved.

Nokia RM-180 Specifications

General

Network Technology	GSM
2G bands	GSM 900 / 1800
SIM	Mini-SIM
Display Type	Monochrome graphic
Messaging	SMS
Clock	Yes
Alarm	Yes
Status	Discontinued
Weight	93 g
Resolution	96 x 65 pixels
Call records	10 dialed
Battery Type	Removable Li-Ion