Phone doesn't switch on
Troubleshooting flow
This means that the phone does not use any current at all when the supply is connected and/or power key
is pressed. It is assumed that the voltage supplied is 3.6VDC. The UEMCLite/Litti will prevent any functionality
at battery/supply levels below 2.9VDC.
Figure 10 Troubleshooting when the phone doesn't switch on
RM-305; RM-306
Baseband troubleshooting
Issue 2 COMPANY CONFIDENTIAL Page 4 –7
Copyright © 2007 Nokia. All rights reserved.
To Next Page
Loading...
