Nokia RM-305 - Receiver Troubleshooting (GSM Bands)

Receiver GSM900/1800
General instructions for GSM900 RX troubleshooting
Steps
1. Connect the phone to a PC with the module repair jig.
2. Start Phoenix and establish a connection to the phone with the data cable e.g. FBUS.
3. Select File and Scan product.
4. Wait a while for the PC to read the information from the phone.
5. Select Testing and RF Controls.
6. Set the parameters as follows:
i Active Unit: RX
ii Band: GSM 900
iii Operation Mode: Continuous mode
iv RX/TX Channel 37
v AGC: Gain 6
Results
The setup should now look like this:
RM-305; RM-306
RF troubleshooting
Issue 2 COMPANY CONFIDENTIAL Page 5 –9
Copyright © 2007 Nokia. All rights reserved.