Figure 91 Blurring caused by shaking hands
Movement in bright light
If an image is taken of moving objects or if the device is used in a moving vehicle, object 'skewing' or 'tilting'
may occur. This phenomenon is fundamental to most CMOS camera types, and usually cannot be avoided.
The movement of camera or object sometimes cause blurring indoors or in dim lighting conditions because
of long exposure time. This is normal; do not change the camera module.
Figure 92 Near objects get skewed when taking images from a moving vehicle
RM-362; RM-363
Camera Module Troubleshooting
Issue 1 COMPANY CONFIDENTIAL Page 5 –7
Copyright © 2008 Nokia. All rights reserved.
To Next Page
Loading...
