MJ-168 Module jig
MJ-168 is meant for component level troubleshooting.
The jig includes an RF interface for GSM and Bluetooth. in addition, it
has the following features:
• Provides mechanical interface with the engine and UI module
• Provides galvanic connection to all needed test pads in module
• Duplicated SIM connector
• Audio components: IHF, MIC
• Connector for control unit
Note: CA-58RS(RF cable) is used together with MJ-168.
CA-58RS is not a part of the MJ-168 sales package and has to
be ordered separately.
Note: Please remove the shield frame before audio testing
by Easy Flash II connector.
The following table shows the attenuation values for MJ-168:
•
Frequency (Hz) Loss (dB)
836600000 0.24
881600000 0.24
897400000 0.25
942400000 0.25
1747800000 0.35
1842800000 0.37
1880000000 0.38
1950000000 0.40
1960000000 0.40
2140000000 0.40
PCS-1 Power cable
The PCS-1 power cable (DC) is used with a docking station, a module
jig or a control unit to supply a controlled voltage.
RM-362; RM-363
Service Devices and Service Concepts
Issue 1 COMPANY CONFIDENTIAL Page 2 –9
Copyright © 2008 Nokia. All rights reserved.
To Next Page
Loading...
