Environmental condition Ambient temperature Notes
No operation or storage
<-30
o
C...>+85
o
C
No storage or operation: an
attempt may damage the phone.
Charging allowed
–10
o
C...+60
o
C
BTemp measurement range for
charging.
Long term storage conditions
0
o
C...+85
o
C
Humidity
Relative humidity range is 5...95%.
The HW module is not protected against water. Condensed or splashed water might cause malfunction. Any
submersion of the phone will cause permanent damage. Long-term high humidity, with condensation, will
cause permanent damage because of corrosion.
Vibration
The module should withstand the following vibrations:
•
5 - 10 Hz; +10dB / octave
•
10 - 50 Hz; 5.58 m
2
/ s
3
(0.0558 g
2
/ Hz)
•
50 - 300 Hz; - 10 dB / octave
ESD strength
Conducted discharge is 8 kV (>10 discharges) and air contact 15 kV ( >10 discharges ).
The standard for electrostatic discharge is IEC 61000-4-2, and this device fulfils level 4 requirements.
RoHS
This device uses RoHS compliant components and lead-free soldering process.
RM-839; RM-840; RM-841
General Information
Issue 1 NOKIA INTERNAL USE ONLY Page 1 – 9
Copyright © 2013 Nokia. All rights reserved.
To Next Page
Loading...
