CORRECT USE
Shaft height is wrong
It is very important to adjust the shaft to your height
correctly to be able to search without discomfort and
fatigue.
Shaft height is correct
Adjust the height of the shaft so that you are standing
in an upright position, your arm is relaxed and the
search coil is approximately 5cm (~2’’) above the ground.
CORRECT WAY OF SWEEPING
Wrong search coil angle
Correct search coil angle
Incorrect way of sweeping
It is important to keep the search coil parallel to the
ground in order to get accurate results.
Correct way of sweeping
The search coil must be parallel to the ground at all
times.
6
CONTENTS
To Next Page
Loading...
Need help?
General
