Customer Confidence 6
Step 1b: DHCP Client Configuration
Type d[hcp] for the configuration mode as shown in Figure 6.
Figure 6: Selecting DHCP Client for WAN configuration
A WAN port summary page will then be displayed as shown in the example Figure 7.
Figure 7: WAN port DHCP client configuration summary page
If everything is correct in the summary, type b[ack] to return to the previous menu and proceed to Step 2 to enter
the location information.
Otherwise, select an option from the Ethernet port configuration menu to display or make changes to the WAN
port settings. When finished with the settings, type b[ack] to return to the previous menu and proceed to Step 2 to
enter the location information.
To Next Page
Loading...
