Nord Drivesystems NORDAC FLEX SK 205E Series User Manual

1 General
BU 0200 en-3118 29
Devices which are configured and approved for use in explosion hazard environments ( Section 2.6
"Operation in potentially explosive environments ") comply with the following directives and standards.
Approval Directive
Applied
standards
Certificates Code
ATEX
(European
Union)
ATEX 2014/34/EU
EN 60079-0
EN 60079-31
EN 61800-5-1
EN 60529
EN 61800-3
EN 50581
C432710_2016
EMC 2014/30/EU
RoHS 2011/65/EU
EAC Ex
(Eurasia)
TR CU 012/2011
IEC 60079-0
IEC 60079-31
TC RU C-
DE.AA87.B.01109
Table 6: Standards and approvals for explosion hazard environments
Pos: 46 /Allgemein/Allgemeingültige Mod ul e/---------Seite numbruc h kom pakt --------- @ 13\ mod_1476369695906_0.docx @ 2265495 @ @ 1

Nord Drivesystems NORDAC FLEX SK 205E Series Specifications

General

Series	NORDAC FLEX SK 205E
Category	Inverter
Protection Class	IP20
Braking Resistor	Optional
Power Range	0.25 to 22 kW
Input Voltage	3 × 380 – 480 V
Output Voltage	Three-phase 0 to input voltage
Control Mode	V/f control, vector control
Communication Interfaces	RS485, CANopen, PROFIBUS
Frequency Range	0 to 600 Hz
Cooling Method	Natural convection
Ambient Temperature Range	-10 °C to +40 °C
Storage Temperature Range	-25 °C to +70 °C
Relative Humidity	95% (non-condensing)
Installation Altitude	Up to 1000 m