NORD USS and Modbus RTU Manual
60 Subject to technical amendments BU 0050 GB-3111
Setting value / Description / Note
Module status
(Module status)
Indicates the actual status (readiness, error, communication) of the technology unit (SK
TU2/3-xxx), but only when own processor is present, therefore not for the SK TU2/3-CTR.
Code details can be found in the respective BUS module manual. Different contents are shown
depending on the modules.
P746 ... [-01]
…
... [-03]
Module status
(Module status)
Status of integrated modules
[-01] Technology unit
[-02] Customer Unit
[-03] Special Extension Unit
When activated, the functions block current, quick stop, remote control and cancel error
are available at the (local) control terminals. To operate the drive, a high signal must be present
on the digital inputs being used before the drive can be enabled.
To Next Page
Loading...
Need help?
General
