5.9 Overview of Parameters, User-defined Settings
BU 0200 GB Subject to technical alterations 143
Parameter Nr.
[Array]
Name
Factory
setting
Super
visor
Setting after commissioning
P 1 P 2 P 3 P 4
P207 (P)
Motor circuit
[star=0/delta=1]
1 * S
P208 (P)
Stator resistance [
]
6.28* S
P209 (P) No load current [A] 3.0 * S
P210 (P) Static boost [%] 100 S
P211 (P) Dynamic boost [%] 100 S
P212 (P) Slip compensation [%] 100 S
P213 (P) Var. ISD control [%] 100 S
P214 (P) Torque precontrol [%] 0 S
P215 (P) Boost precontrol [%] 0 S
P216 (P) Time boost precontrol [s] 0.0 S
P217 (P) Oscillation damping [%] 10 S
P218 (P) Modulation depth [%] 100 S
P219 Auto. flux adjustment [%] 100 S
P220 (P) Parameter identification 0
*) dependent on FI power or P200/P220
REGELUNGSPARAMETER (5.4) Encodereingang
P300 (P) Servo Mode [On / Off] 0 S
P301 Incremental encoder 6 S
P310 (P) Speed controller P [%] 100 S
P311 (P) Speed controller I [%/ms] 20 S
P312 (P)
Torque current controller P
[%]
200 S
P313 (P)
Torque current controller I
[%/ms]
125 S
P314 (P)
Limit torque current
controller [V]
400 S
P315 (P)
Field current controller P
[%]
200 S
P316 (P)
Field current controller I
[%/ms]
125 S
P317 (P)
Limit field current controller
[V]
400 S
P318 (P)
Field weakening controller P
[%]
150 S
P319 (P)
Field weakening controller I
[%/ms]
20 S
P320 (P) Field weakening limit [%] 100 S
P321 (P) Speed control I release time 0 S
P325 Encoder function 0 S
P326 Encoder conversion 1.00 S
P327 (P) Speed slip error [rpm] 0 (off) S
CONTROL TERMINALS (5.5)
To Next Page
Loading...
