nord NORDAC SK 225E - Page 144

NORDAC SK 200E Handbuch
144 Subject to technical alterations BU 0200 GB
Parameter Nr.
[Array]
Name
Factory
setting
Super
visor
Setting after commissioning
P 1 P 2 P 3 P 4
P400 [01] (P) Setpoint input function 1
P400 [02] (P) Setpoint input function 1
P400 [03] (P) Setpoint input function 1
P400 [04] (P) Setpoint input function 1
P400 [05] (P) Setpoint input function 1
P400 [06] (P) Setpoint input function 1
P400 [07] (P) Setpoint input function 1
P402 [01] Adjustment 1: 0% [V] 0.0 S
P402 [02] Adjustment 1: 0% [V] 0.0 S
P403 [01] Adjustment 1: 100% [V] 10.0 S
P403 [02] Adjustment 1: 100% [V] 10.0 S
P410 (P) Min. freq. aux. setpoint [Hz] 0.0
P411 (P) Max. freq. aux. setpoint [Hz] 50.0
P412 (P) Nom.val process ctrl [V] 5.0 S
P413 (P)
P-component PID control
[%]
10.0 S
P414 (P)
I-component PID control
[%/s]
10.0 S
P415 (P) Process controller limit [%] 10.0 S
P416 (P) Ramp time PI setpoint. [s.] 2.00 S
P417 (P) Offset analog output 1 [V] 0.0 S
P418 (P) Function analog output 1 0 S
P419 (P)
Standardisation analog
output 1 [%]
100 S
P420 [01] Digital inputs (DIN 1) 1
P420 [02] Digital inputs (DIN2) 2
P420 [03] Digital inputs (DIN3) 4
P420 [04] Digital inputs (DIN4) 5
P426 (P) Emergency stop time [s] 0.10 S
P427 Emergency stop Error 0 S
P428 (P) Automatic start 0 (off) S
P434 Digital output function 1
P435 Digital output norm. [%] 100
P436 Digital output hysteresis [%] 10 S
P460 Watchdog time [s] 10.0 S
P464 Fixed frequency mode 0 S
P465 [01] Fixed frequency 1 [Hz] 5
P465 [02] Fixed frequency 2 [Hz] 10
P465 [03] Fixed frequency 3 [Hz] 20
P465 [04] Fixed frequency 4 [Hz] 35
P465 [05] Fixed frequency 5 [Hz] 50