nord NORDAC SK 225E - Page 146

NORDAC SK 200E Handbuch
146 Subject to technical alterations BU 0200 GB
Parameter Nr.
[Array]
Name
Factory
setting
Super
visor
Setting after commissioning
P 1 P 2 P 3 P 4
P482 [04] Norm. Bus I/O Out Bits [%] 100
P482 [05] Norm. Bus I/O Out Bits [%] 100
P482 [06] Norm. Bus I/O Out Bits [%] 100
P482 [07] Norm. Bus I/O Out Bits [%] 100
P482 [08] Norm. Bus I/O Out Bits [%] 100
P483 [01] Hyst. Bus I/O Out Bits [%] 10 S
P483 [02] Hyst. Bus I/O Out Bits [%] 10 S
P483 [03] Hyst. Bus I/O Out Bits [%] 10 S
P483 [04] Hyst. Bus I/O Out Bits [%] 10 S
P483 [05] Hyst. Bus I/O Out Bits [%] 10 S
P483 [06] Hyst. Bus I/O Out Bits [%] 10 S
P483 [07] Hyst. Bus I/O Out Bits [%] 10 S
P483 [08] Hyst. Bus I/O Out Bits [%] 10 S
ADDITIONAL PARAMETERS (5.6)
P502 (P) Master function value 0 S
P503 Master function output 0 S
P504 Pulse frequency [kHz] 6.0 S
P505 (P)
Abs. minimum frequency
[Hz]
2.0 S
P506
Auto. Error
acknowledgement
0 S
P509 Control word source 0 S
P510 [01] Setpoint source (HSW) 0 (auto) S
P510 [02] Setpoint source (NSW) 0 (auto) S
P511 USS baud rate 3 S
P512 USS address 0
P513 Telegram time-out [s] 0.0 S
P514 CAN baud rate * [kBaud] 5 S
P515 [01] CAN address * 32 dec S
P515 [02] CAN address * 32 dec S
P515 [03] CAN address * 32 dec S
*) System bus
P516 (P) Skip frequency 1 [Hz] 0.0 S
P517 (P) Skip frequency area 1 [Hz] 2.0 S
P518 (P) Skip frequency 2 [Hz] 0.0 S
P519 (P) Skip frequency area 2 [Hz] 2.0 S
P520 (P) Flying start 0 S
P521 (P) Flying st. resolution [Hz] 0.05 S
P522 (P) Flying st. offset [Hz] 0.0 S
P523 Factory setting 0