Need help?Do you have a question about the Nordic Semiconductor nPM1300 and is the answer not in the manual?
Defines a skilled person for safe operation of the EK.
Warns about susceptibility to Electrostatic Discharge (ESD) and necessary precautions.
Provides safety warnings regarding battery replacement procedures and associated risks.
Offers guidance on proper disposal and recycling of electrical products.
Overviews the nPM1300 EK's main hardware and software capabilities.
Lists the core features and functionalities of the nPM1300 Power Management IC.
Describes the nPM PowerUP computer application used for PMIC evaluation.
Details specific issues and required actions for the nPM1300 EK version 0.9.0.
Lists the essential hardware components needed for using the nPM1300 EK.
Specifies the required software for evaluating the nPM1300 EK.
Describes the nPM1300 Evaluation Board and its pre-mounted jumpers.
Mentions the inclusion of an information leaflet within the kit.
Provides information on locating hardware design files like schematics and PCB layouts.
Illustrates the functional architecture of the nPM1300 EK.
Details the flexible and configurable power supply system of the nPM1300 EK.
Explains the use of NTC thermistors for battery temperature monitoring.
Describes access to regulated and unregulated outputs via pin headers and probe loops.
Introduces status and control pins, including LEDs, GPIOs, TWI, VSET, SHPHLD, VDDIO, and Load Switches/LDOs.
Details how to configure and evaluate the nPM1300 PMIC using the nPM PowerUP app.
Explains jumper usage for configuring PMIC output states, startup conditions, and interfaces.
Describes the four push buttons and the PMIC pins they control (SHPHLD/RESET, GPIOs).
Introduces the nPM Fuel Gauge Board as an extension for battery profiling.
Instructions on using an oscilloscope to measure current by probing voltage drop.
Details how to use an ampere meter to measure average current flow.
Guides on using the Power Profiler Kit II (PPK2) for current measurements.
Provides step-by-step instructions for connecting and configuring the nPM1300 EK with the nRF5340 DK.
Details the specific pin connections between the nPM1300 EK and the nRF5340 DK.
Outlines the configuration process for using the nPM1300 EK with custom hardware.
Lists relevant Nordic Semiconductor documentation for further information.
General| Type | Power Management IC (PMIC) |
|---|---|
| Operating Temperature | -40°C to +85°C |
| Efficiency | Up to 95% |
| Battery Charging | Yes, integrated battery charger |
| Features | battery management |
To Next Page