2
Minimum requirements
Before you start, check that you have the required hardware and software.
Hardware requirements
• USB Type-C cable with 1.5 A current capability (to power the PMIC)
• USB Type-A to Type-C cable with USB 2.0 High Speed compatibility (to power the nPM Controller)
• Wires (2.54 mm / 0.1'' pitch) for connecting the EK with a Nordic DK, or your own device
• Batteries
The EK supports the following types of batteries:
• Lithium-ion (Li-ion)
• Lithium-polymer (Li-Poly)
• Lithium iron phosphate (LiFePO
4
)
Software requirements
• nPM PowerUP available from nRF Connect for Desktop
4490_387
9
To Next Page
