1
Introduction
The nRF52 Development Kit (DK) is a hardware development platform used to design and develop
application firmware on the nRF52832, nRF52810, or nRF52805 System on Chip (SoC)s.
To set up the nRF52 DK, see Getting started with the nRF52 DK. To start developing your application, see
the Software development Getting Started Guides. For more detailed documentation regarding nRF52810
development, see Developing for nRF52810 in the SDK documentation.
Key features
• nRF52832 flash-based Bluetooth
®
Low Energy and ANT
™
/ANT+
™
SoC solution
• Buttons and LEDs for user interaction
• I/O interface for Arduino form factor plug-in modules
• SEGGER J-Link OB Debugger with debug out functionality
• UART interface through virtual COM port
• Drag-and-drop Mass Storage Device (MSD) programming
• Support for NFC-A Listen Mode
• Mbed
™
enabled
For access to firmware source code, hardware schematics, and layout files, see www.nordicsemi.com.
4397_500
4
To Next Page
Loading...
