4 5
LED 1 - Power
LED 2 - GSM
network LED
LED 3 - IR LED
What AirPatrol does?
AirPatrol is a heat pump controller you operate with a mobile phone. It is
compatible with all most popular heat pumps and all mobile phones
(see www.airpatrol.eu for the complete list).
The easiest way to use AirPatrol is with a Smartphone, using the
AirPatrol app downloadable from the Android Market (for Android
phones) or App Store (for iPhone). It can also be controlled with regular
mobile phone text messages (SMS). AirPatrol allows you to have
long distance control over the mode of the pump, room temperature
and fan speed settings. AirPatrol can also inform you about low room
temperature, power failures and heat pump service intervals.
Indicator lights
The controller has 3 LED indicators and 2 buttons for easy setup. It has
also 2 infrared LEDs that transmit your commands to the heat pump.
LED 1 - Power
on switched on
blinking no power, working on battery
off switched off
LED 2 - GSM network LED
on restart time, SIM missing or SMS processing
1 blink (3 s interval) normal status
3 blinks (3 s interval) no signal from mobile phone or not connected to a
mobile network
blinking (500 ms interval) data call session is active
LED 3 - IR LED
blinking transmitting by IR
To Next Page
Loading...