10 11
ON
sms: sms:
OFF
turns heat pump on turns heat pump off
Testing AirPatrol
To see if AirPatrol can send commands to your heat pump, turn off the
pump and press the controller’s TEST button. When the connection is
established, AirPatrol turns the pump on with its last settings and you
can proceed using the controller.
Turning heat pump ON/OFF
SMS Command ON turns heat pump on.
SMS Command OFF turns heat pump off.
TIP!
Test before mounting the
controller!
Fig. 6, 7
Do not place AirPatrol on the
left side of the indoor unit!
Indoor unit’s internal
condenser might block
AirPatrol’s signal.
To Next Page
Loading...