Building and testing a sample application
1. Build and program the sample application as described in Building and programming a sample
application.
Use the following information when opening the nRF Connect SDK Project, where NCS_folder is the
folder where you installed the nRF Connect SDK (for example, C:\NCS):
• CMakeLists.txt: NCS_folder\nrf\applications
\asset_tracker_v2\CMakeLists.txt
• Board Directory: NCS_folder\zephyr\boards\arm\nrf9160dk_nrf9160
• Board Name: nrf9160dk_nrf9160_ns
• Build Directory: accept the default
2. Test the Asset Tracker v2 application as described in Testing the application on page 12.
4418_1412
17
To Next Page
Loading...