NordicTrack AIRGLIDE 14i - Page 15

15
17
101
81
37
17. Avoid pinching the wires. Orient a Lower Tray
Cover (81) as shown, and hold it near the Right
Control Wire (134). Attach the Lower Tray Cover
to the right side of the Accessory Tray (37) with
two M4 x 16mm Screws (101).
Repeat this step on the other side of the
elliptical.
Avoid
pinching
the wires
134
75
4
117
73, 74
18. Avoid pinching the wires. Press the Front
Shield Cover (117) onto the Left and Right
Shields (73, 74).
Then, press the Center Shield Cover (75) onto
the Left and Right Shields (73, 74).
Avoid pinching
the wires
18