15
14. Attach a Tray Bracket (107) to the right Upright
(89) using the two indicated holes with two #8
x 3/4" Screws (2). Start both Screws, and then
tighten them.
Attach the other Tray Bracket (not shown) to
the left Upright (not shown).
Attach the Tray (108) to the Tray Brackets (107)
with four #8 x 3/4" Screws (2) (only one side
is shown). Start all four Screws, and then
tighten them.
14
2
107
108
2
89
88
87
95
96
13
13. Tighten a #8 x 3/4" Screw (2) into the Left
Outside Upright Cover (87) and into the bottom
of the left handrail assembly (A); do not over-
tighten the Screw.
Press the Left Inside Upright Cover (88) against
the Left Outside Upright Cover (87) until they
snap together.
Repeat the steps above on the other side
with the Right Inside Upright Cover (95) and
the Right Outside Upright Cover (96).
2
2
A
To Next Page
Loading...
